icon.
Settings Window
The Peasy Folder Synchronisation settings window is accessed from the tool bar icon.
Poll time in seconds
The sync folders have to be constantly polled to check if there is any file change. By default the time is set for two minutes. However for rapid updating this can be adjusted to a lower value.
IP Port number
This is the IP port number that is used for remote communication. The default is 5658, but any value between 1000 and 65000 can be used instead. Note that this port number must be open in the computers firewall settings.
Use TLS
To enhance security the communication can be encrypted. When ticked TLS encryption is applied to all communication. Note that it will run a little slower with this option enabled.
Confirm new connections
When selected new connections must be manually confirmed. The Confirmation window will only be available for 20 seconds.
Multicast Port number
This is used by Copy Command to .discover other device on your local private network. It must be set the same for all of them. The default is 5657, but any value between 1000 and 65000 can be used instead. Note that this port number must be open in the computers firewall settings.
Multicast Address
This is used by Copy Command to .discover other device on your local private network. It must be set the same for all of them. The default is 224.0.2.142. Note that IPv6 addresses like ff02::142 can also be used.
Use system tray
The application can hide away in the System Tray when not actively used. It will continue to collect the clipboard in the back ground
The 'Minimize to system' tray option will hide in the System Tray when the minimize button is pressed.
Similarly the 'Close to system tray' option will hide in the System Tray when the application close button is pressed.
To open the application from the System Tray a single or double click can be used depending upon the 'Single click to show application' setting.